大学院工学研究院
研究キーワード
Digitalisation
,Smart manufacturing
,Glass cutting
,Media finishing
,Laser processing
経歴
2023年
-
現在
千葉大学 大学院工学研究院 特任助教
2021年
-
現在
シンガポール科学技術研究庁 先端再製造技術センター (ARTC)・シンガポール生産技術研究所 (SIMTech) Consultant
2021年
-
2023年
千葉大学 大学院工学研究院 特任研究員
2018年
-
2020年
シンガポール科学技術研究庁 先端再製造技術センター (ARTC) Advanced Development Scientist
学歴
-
2016年
京都大学 大学院工学研究科 博士後期課程
-
2010年
東京工業大学 大学院理工学研究科 修士課程
委員歴
2022年
-
2023年
3rd International Conference on Advanced Surface Enhancement (INCASE 2023) International Scientific Committee
2018年
-
2019年
1st International Conference on Advanced Surface Enhancement (INCASE 2019) Organising Committee, Proceedings/Programme Editor
2014年
-
2017年
精密工学会 事業部会 事業企画委員会2G
受賞
2024年
千葉県加工技術研究会, 優秀講演賞(指導学生の受賞)久保田祐介
2024年
砥粒加工学会, 砥粒加工学会論文賞 2023年度徳永大二郎 佐藤正隆 伊東 翔 比田井洋史 尾松孝茂 松坂壮太
2022年
砥粒加工学会, 優秀講演賞 ABTEC2022(指導学生の受賞)長野尚人
2015年
レーザー学会, 優秀論文発表賞 第35回年次大会伊東 翔
2009年
砥粒加工学会, 優秀講演論文賞 ABTEC2008伊東 翔
論文
Shunta Fukushima   Hirofumi Hidai   Sho Itoh   Tetsuo Kishi   Souta Matsusaka   
Journal of Non-Crystalline Solids 631 122918-122918 2024年5月 [査読有り]
Sho Itoh   Souta Matsusaka   Hirofumi Hidai   Kumiko Murakami   Mitsuru Kitaichi   
International Journal of Fracture 2024年4月 [査読有り]
This work reports a selective median crack propagation phenomenon in glass, leading to a novel glass cutting process. We found that by scribing a glass sample to the extent of plastic deformation with a deformation depth of 100–400 nm, followed by...
Ryota Someno   Kentaro Imai   Yuichiro Matsumoto   Souta Matsusaka   Sho Itoh   Hirofumi Hidai   Akira Chiba   Noboru Morita   
International Journal of Automation Technology 17(5) 521-528 2023年9月 [査読有り]
The effects of the ambient temperature and relative humidity on crack propagation behavior during wheel scribing were investigated. A chamber was built to allow dynamic observation of crack propagation behavior in a controlled atmosphere. A develo...
Miyuka Kono   Hirofumi Kawamura   Souta Matsusaka   Sho Itoh   Hirofumi Hidai   
Precision Engineering 82 212-218 2023年7月 [査読有り]
Kosuke Sakamoto   Daijiro Tokunaga   Sho Itoh   Hirofumi Hidai   Souta Matsusaka   Takashige Omatsu   Koji Koyama   Seong-Woo Kim   Noboru Morita   
Diamond and Related Materials 110045-110045 2023年5月 [査読有り]
MISC
比田井 洋史   伊東 翔   戸倉 和   
光アライアンス 23(6) 29-32 2012年6月
HIDAI Hirofumi   ITOH Sho   TOKURA Hitoshi   
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2011(6) "3364-1"-"3364-4" 2011年11月
We demonstrated high-aspect-ratio microdrilling in borosilicate glass with the fourth harmonic of a nanosecond Nd:YVO_4 laser. This laser illumination yielded drilled holes with diameters of φ8.2 ± 3.1μm and φ6.3 ± 1.0μm at depths from 480 to 2040...
比田井洋史   伊東翔   戸倉和   
レーザ協会誌 34(3/4) 28-33 2009年10月
書籍等出版物
Sho Itoh, Shashwat Shukla(担当:編集)
Springer Singapore 2020年 [査読有り]
https://link.springer.com/book/10.1007%2F978-981-15-0054-1
講演・口頭発表等
伊東翔   
プラナリゼーションCMPとその応用技術専門・3次元積層造形後処理加工技術研究分科会(3DP-RC) 2024年4月 [招待有り]
S. Itoh   S. Matsusaka   H. Hidai   K. Murakami   M. Kitaichi   
10th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023) 2023年11月
伊東翔   松坂壮太   比田井洋史   村上久美子   北市充   
2023年度砥粒加工学会学術講演会 2023年8月
S. Itoh   N. Nagano   S. Matsusaka   H. Hidai   
Lasers in Manufacturing (LiM 2023) 2023年6月
S. Itoh   N. Nagano   S. Obuchi   S. Matsusaka   H. Hidai   
9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022) 2022年
産業財産権
WO2018207533A1, JP2018-189552A
WO2017094457A1, JP2017-102315A
WO2015041165A1, CN105377732B, CN107381199B, TWI572571B, JP6410209B
社会貢献活動
【その他】韓国・亜洲大学校 Ajou University-Chiba University Joint Symposium 2024年2月
【講師】香港中文大学 機械与自動化工程学系 検討会 2023年11月